Change vehicle

Select Your Ute!

Use the dropdowns below to select your vehicle.

You will then be able to see what's available for your vehicle model once you have.

I have a

It's a

from

Hit enter to search or ESC to close

Your cart summary

Checkout

The GearForce System to Suit Ford Ranger Wildtrak

Compatible with the following Next Gen Ranger Models:

2022+ Wildtrak: Available

2022+ Wildtrak X & Platinum: Not Compatible

2022+ Ranger Raptor: Not Compatible

GearForce Tub Platform Dimensions - Download

Fitting Instructions:

GearForce Tub Platform - Download

GearForce Mounting Bracket - Download

Please Note: The GearForce Platform requires a genuine Ford J-Brace fitted to the vehicle. This can be ordered from your Ford dealer and will not be included with the product. More info can be found here.

GearForce Opening Tub Platform

Provides a strong load area above your roller cover to load gear that would otherwise not fit inside the tub.

For added convenience, the platform opens on gas struts so you can still easily access the gear under your roller cover.

Part #GF-FRC2WT-TUBPLATFORM

Dynamic Load Rating: 200kg

Static Load Rating: 300kg

Important Information:

It is a requirement from Ford that any 2022+ Ranger fitted with an aftermarket accessory must also have a 'J-Brace' strengthening kit installed. The J-Brace kits are supplied by Ford and need to be installed by your Ford Dealer prior to the fitment of the additional accessory for the warranty on the vehicle to be valid.

GearForce Opening Tub Platform

GearForce Tub Rack and Cantilever System

The GearForce Tub Rack System allows you to mount a Utemaster Cantilever Roof Rack either as a standalone setup or in conjunction with your GearForce Opening Platform.

It is mounted independently to the platform so that the platform can still open without interfering with the tub rack and cantilever setup.

Part #GF-FRCC2WT-CANTILEVERRACK

> More Info

Important Information:

It is a requirement from Ford that any 2022+ Ranger fitted with an aftermarket accessory must also have a 'J-Brace' strengthening kit installed. The J-Brace kits are supplied by Ford and need to be installed by your Ford Dealer prior to the fitment of the additional accessory for the warranty on the vehicle to be valid.

GearForce Tub Rack and Cantilever System

Utemaster Cargo Divider System

The Utemaster Cargo System allows you to divide your tub into sections, this keeps everything in place while travelling so you can show up organised and ready.

Part #TS-FRC2WT-TUBDIVIDER

The Utemaster Cargo Divider System suits all models of Next-Gen Ford Ranger.

> More Info

Utemaster Cargo Divider System

GearForce Opening Tub Platform

Roller shutters are built for convenience, not for versatility. They limit the amount of gear you can take with you because you can't load anything on top and you lose a significant amount of space inside the wellside from the canister at the front.

This means you are limited by how much gear you can take and will often have to resort to a trailer or second vehicle for those big jobs or serious adventures.

The GearForce Opening Tub Platform is a game changer as it doubles the storage capacity of your ute by giving you a strong platform above your roller cover that can take up to 200kgs of additional gear. For added convenience, the platform opens on gas struts so you can still easily access the gear under your roller cover.

It is also super easy to remove if you need to with a quick-release hinge and gas strut mechanism.

The platform comes with built-in T-Tracks and mount positions to accommodate standard roof rack accessories such as Bike Racks, Ski Racks, Tool Holders, Fishing Rod Holders, Recovery Tack Mounts, Spare Wheel Holders, Aerial, Eye Bolts, High Lift Recovery Jack Mounts, or Conduit Carriers.

Strong Aluminium Construction

The GearForce Platform is made from hard-wearing aluminium with stainless steel hardware with a high load capacity so you don't have to worry about damaging your Roller Shutter underneath!

The platform boasts a dynamic load capacity of 200kgs and a static load capacity of 300kgs.

Whether you have a dirty wheelbarrow, ladder, pallet, kayak or mountain bike, the GearForce Platform will be the best thing you have ever added to your Wildtrak.

Utemaster GearForce Platform to suit Next Gen Ranger Wildtrak

Securing Your Load

When carrying work or adventure gear you need the flexibility of multiple tie-down options.

Strapping loads down with a load binder is a breeze using the tie-down hooks which are available for purchase, these can be adjusted anywhere on the rack where there is a t-track or mounting hole present.

The T-track system allows you to add almost any roof rack accessory in multiple locations on the platform. Some examples are Bike Racks, Ski Racks, Tool Holders, Fishing Rod Holders, Recovery Tack Mounts, Spare Wheel Holders, Aerial, Eye Bolts, High Lift Recovery Jack Mounts, or Conduit Carriers.

Whether you are getting stuff done, or enjoying life's adventures you can customise this rack to best suit your lifestyle.

Utemaster GearForce Platform to suit Next Gen Wildtrak Ute Accessories Roller Shutter Rack

Adjustable Gas Assisted Opening

If you are using the Platform how it is intended with a load on top sometimes you may need a hand with lifting it up.

The Utemaster GearForce Platform has three different mounting positions and depending on which mounting angle you use the amount of lifting force varies. On the easy position, the platform can comfortably be opened and closed without any load on top, on the maximum it can lift a load of up to 30kgs.

Wildtrak Roller Shutter Platform Utemaster GearForce Accessories Ute Tub Platform Rack Tray

Easy Access To Your Tub

Fixed platforms are sometimes used on Wildtraks. However, these will generally restrict access to your tub because they don't open out of the way or are mounted on high legs which makes the loading height difficult.

The GearForce Platform hinges open at the front giving you easy access to all your gear.

Next Gen Wildtrak Platform to suit Roller Shutter Utemaster GearForce Platform Tray Rack Ute Accessory

Load Stop

The GearForce platform comes standard with a load stop at the front which you can push your load hard up against it without worrying about damaging your cab. This also gives you additional tie-down points to ensure that the most awkward loads are still safe.

Load Stop Utemaster GearForce Platform to suit Ford Ranger Wildtrak Roller Shutter Ute Accessories

Easily Removed

Due to the fact that a roller shutter has no load capacity, some ute owners choose to mount a platform over the top so that they can utilise the load area.

The tub platforms/racks are usually hard to remove which makes it difficult to transport a large object such as a motorbike.

The GearForce Platform is designed with a quick-release hinge and gas strut system which allows you to remove it in under a minute when required.

Quick Release Tub Rack Utemaster GearForce Platform Shutter Cover Rack Tray Platform

Locking System

The GearForces Platforms comes standard with a lock to secure it in place.

This ensures your GearForce Platform is safe on the tub at all times

Next Gen Ford Wildtrak Roller Shutter Utemaster GearForce Opening PLatform Security Lock

Adjustable Crossbars

With multiple holes running along the platform, you can adjust the cross bars to be further or closer together to suit your specific loads such as carrying gas bottles, jerry cans, and any other specific gear that might otherwise fall between the crossbars.

Utemaster Next Gen Wildtrak GearForce Platform for Roller Cover Shutter

Single Handed Opening

The slam catch system of the platform is operated by a spring bolt on either side.

If you only have one hand spare you can lock out the spring bolts individually, meaning you can open the platform without putting down the gear that you're carrying.

Utemaster GearForce Platform For Wildtrak Ute Tub Accessories Locking Secure Hard Platform

Low Profile

The GearForce Platform has a low profile and sits low and close to the roller cover meaning that it looks stylish and also keeps the loading height down.

Utemaster GearForce Platform to suit Next Gen Wildtrak 2024 Roller Shutter Cross Bars Ute Accessories

Optional Accessory: GearForce Tub Rack and Cantilever System

The GearForce Tub Rack System allows you to mount a Utemaster Cantilever Roof Rack either as a standalone setup or in conjunction with your GearForce Opening Platform.

The GearForce Tub Rack System is mounted independently to the platform so that the platform can still open without interfering with the tub rack and cantilever setup.

This system is capable of supporting 200kgs standalone or if used in conjunction with the GearForce Platform there is a combined load rating of 200kgs ie 100kgs on the Cantilever Roof Rack and 100kgs on the GearForce Platform. The GearForce Tub Rack legs can also be used for easily mounting accessories and they can be easily removed if needed.

The Cantilever Roof Rack can be specified with a Rear Roller to assist loading.

Please note: The Cantilever Rack is designed to carry 1200mm wide sheets of ply without the need for roof racks mounted to the cab of the ute.

You will need to remove the cab mounted roof rails so the Cantilever Rack can sit in their place - This is very simple to do, you will be supplied with a kit to fit the holes where the rails were attached.

GearForce Tub Rack and Cantilever System Dimensions - Download

Fitting Instructions:

GearForce Tub Rack and Cantilever System - Download

Rack GIF 1200

GearForce Ladder Rack

The GearForce Rear Ladder Rack is height adjustable so it can be aligned with crossbars on the cab of the ute.

This product can be used in conjunction with the GearForce Opening Platform or purchased individually. It has a dynamic load rating of 100kgs.

GearForce Ladder Rack Dimensions - Download

Fitting Instructions:

GearForce Ladder Rack - Download

GearForce Ladder Rack to suit Next Gen Wildtrak Roller Shutter Platform

Optional Accessory: Utemaster Cargo Divider System

Is your tub a cluttered mess that has a lack of organisation? Do you not want the restriction of a drawer system but are tired of not being able to get out the thing you need without everything else coming with it?

The Utemaster Cargo System allows you to set your tub up for success by creating sections for all of your gear meaning that everything stays where it should be while travelling and you can show up organised and ready.

The divider system can be easily adjusted or removed to suit specific loads and has a series of tie-down points for objects such as gas bottles.

The Utemaster Cargo Divider System suits all models of Next-Gen Ford Ranger.

Cargo Divider System Dimensions - Download

Fitting Instructions:

Wildtrak Cargo Divider System - Download

Next-Gen Ford Ranger Cargo Divider System - Download

Utemaster Tub Wellside Cargo dividers System Tub Gear to suit Next Gen Ford Rangers Sport Wildtrak XLT Raptor Platinum

PRICING/ORDER NOW

1) Head to our Ute Builder

2) Select your vehicle model

3) Choose a product and accessories

In the Ute Builder click "Send Build Summary" to send yourself a full breakdown of the build with more information or click "Add to Cart" to order it straight off our website.

Ute Builder / Pricing