Use the dropdowns below to select your vehicle.
You will then be able to see what's available for your vehicle model once you have.
Hit enter to search or ESC to close
Your cart summary
Please note: The Roof Vent is no longer supplied with the Service Body as it is not required.
A Van or Wellside Canopy setup used to be seen as the only solution for transporting your mobile workspace. A Ute Service Body gives you van-like storage with all the benefits of a ute that Kiwis have come to love.
The Double Cab Service Body gives you a large amount of storage while keeping the full two rows of seats for passengers
Part #SBD3F-1800-S
Double Cab Service Body Dimensions:
External: 1800mm long x 1800mm wide x 1000mm high
Internal: 1740mm long x 1720mm wide x 887mm high
The Extra Cab Service Body is the ultimate combination of in-cab storage and workspace at the rear - the rear seat is ideal for the occasional passenger and laptop/sensitive object storage.
Part #SBD3F-2100-S
Extra Cab Service Body Dimensions:
External: 2100mm long x 1800mm wide x 1000mm high
Internal: 2040mm long x 1720mm wide x 887mm high
The Single Cab Service Body provides maximum storage and versitility for a wide range of loads.
Part #SBD3F-2400-S
Single Cab Service Body Dimensions:
External: 2400mm long x 1800mm wide x 1000mm high
Internal: 2340mm long x 1720mm wide x 887mm high
Aluminium is used wherever possible to minimise weight and increase your payload.
In fact, the total weight of the complete Double Cab Service Body is 230kg - This is only approximately 14kg more than a wellside and fibreglass canopy.
To work out your payload we can give you an accurate estimate of the total fitout including accessories.
A Ute can go pretty much anywhere.
We help your service fleet get everything to where it needs to be, allowing you to complete the job, and ultimately earn revenue.
Take a look at the video below comparing the efficiency of a Utemaster Service Body with a Wellside Canopy.
Ute's are designed to flex between the wellside and the cab, this can be problematic for roof racks that are mounted to the Service Body and the cab because they can damage the vehicle when you have a load secured.
As a solution, we've developed a cantilever roof rack designed to carry all the materials you could with a standard roof rack. This rack is cantilevered from the Service Body so when the flex occurs it will not damage the vehicle.
The Cantilever Roof Rack is rated to 200kg! So you can take all your gear to the job without needing to tow a trailer.
Looking for a way to reduce time spent at the job site?
When you are on the job site you will open and close your Service Body doors multiple times throughout the day. It is essential that this process is fast and easy so time can be better spent working on the job than locking and unlocking your doors to access gear.
That is why we provide a slam locking system as standard with all of our Service Body fitouts. This handle makes it easier and faster to access your gear. Simply pull on the handle and the door will swing open. Slam it back down and it will snap into place.
The double edge seal runs around all four edges of each door, ensuring the protection of your equipment from water and dust, especially while driving.
The inbuilt rain channel and sealed hinge mean that when the door is open, rain is directed away from the door opening. The channel runs around the full perimeter of each door.
Large 2.93m2 side doors are designed to shield you from the elements, providing essential on-site cover for when the weather turns against you.
A hard-wearing powder-coated finish is applied to the aluminium to protect it from the elements and provide a professional look. This is a generic white finish so will not be an exact match to the paint on the vehicle (see gallery below).
If required, we can colour-match the Service body to your vehicles paint code.
Utemaster specialises in creating commercial ute fitouts that guarantee a return on investment.
Hear what Peter from Firewatch Coromandel had to say about this Utemaster Service Body:
If you're a tradesman, auto/marine electrician or a fleet manager looking to maximise your capability to get more work done faster, a Service Body by Utemaster is the solution.
Hear what Tyrone from TPM Auto Electrical had to say about this Ute Service Body:
When an accident occurs, emergency response teams need to arrive at the scene as soon as possible! Without a 4WD Ute setup, it can be difficult to access remote locations and delay the time it takes to get to the scene of an accident. Traditionally, vans have been the preferred mode of transport because of their ability to carry large amounts of gear. However, they lack 4WD power and can delay the time it takes to access equipment.
With the Utemaster Service Body, you get the best of both worlds: Load capacity and 4WD. Hear why Senior Firefighter Lale Stapleford from Huntly Fire Brigade chose the Utemaster Service Body to enhance their new Ute.
Click to enlarge images
Is your company the same as the others in your field? Of course not! That's why we give you the flexibility to configure your Ute Service Body to suit your unique needs.
Try our Ute Builder and choose from a large range of shelving, drawers and accessories to add to your commercial fitout.
